CUPC-3 « Arton

Product description

The “Arton-configurator” software and the CUPC-3 computer communication unit allow you to configure the components of the radio channel set and view their status using a computer. In addition to the main functions inherent in such configurators, the user has access to the counters built into the SPD-10QR, SPR-10R radio channel detectors, which allows detecting improper maintenance of the product, as well as understanding how the battery capacity is used during the detector’s operation. With the help of the configuration program, you can see the real dusting state of the SPD-10QR smoke sensor camera, and it is also possible to combine detectors with the corresponding addresses into groups so that the activation of two detectors in the group creates a fire alarm signal in the loop to which the base station is connected.

In addition to the main functions, it allows:

the user has access to the counters built into the SPD-10QR, SPR-10R radio channel detectors, which makes it possible to detect improper maintenance of the product, as well as to understand how the battery capacity is used during the operation of the detector;
with the help of the configuration program, you can see the real dusting status of the SPD-10QR smoke sensor camera;
with the help of the configuration program, it is possible to combine detectors with corresponding addresses into groups so that the activation of two detectors in the group creates a fire alarm signal in the loop to which the base station is connected.

Specifications

Characteristic

Value

Current consumption from the USB bus of the PC

no more than 480 mA

Nominal output voltage CUPC-3

no more than 5 V

Overall dimensions

50х17х7 mm

Operating temperature range

from 0 to 40 °С

Relative air humidity at 40°C

no more than 95 %

Atmospheric air pressure

from 86 to 107 kPa