VEKTOR-16P-12 (16P-24) – unaddressed
Product description 
Vector-16P-12 (24) non-addressable reception and control device is intended for the organization of centralized and autonomous fire protection of various objects by round-the-clock monitoring of the condition of up to 16 alarm loops (SHS ).
- The device meets the requirements of DSTU EN54-2, DSTU EN54-4, DSTU EN54-13, DSTU EN54-21 standards.
- block architecture;
- 16 input-output channels (2 blocks of 8 channels);
- operating modes of the input-output channel: fire loop, logical loop, protective loop, key;
- operating modes of the loop: fire-fighting with re-checking with an edge capacitor;
- fireman with retesting with terminating resistor;
- firefighter without repeated inspection with edge capacitor;
- firefighter without repeated inspection with a terminating resistor;
- logical (discrete input); protective; exit ( key ).
- It is possible to connect passive and active detectors in one AL, building combined AL using 2-wire and 4-wire connection schemes.
- low electricity consumption due to the use of fire AL with an edge capacitor, dynamic power supply of the AL (discrete inputs);
- output keys: "Exit", "Fire";
- three programmable outputs with circuit integrity control; three outputs of the "open collector" type without monitoring the integrity of the circuit; output relay for two groups of switchable contacts (factory setting - "Fault" output), convenient controls and indications: simple menu (no more complicated than a simple mobile phone);
- digital display with large illuminated symbols;
- standard telephone keyboard;
- end-to-end numbering (addressing) of each object (loop, output), communication blocks and interface collectors;
- galvanic isolation of blocks, which ensures increased reliability and maintainability of the device;
- the possibility of organizing a hierarchical group of up to 20 devices with unified control and management in accordance with the requirements of DBN 2.5.56-2010;
- connection of the PKUM-1 interface GSM communicator for communication with the centralized control panels;
- two batteries;
- convenient display.
Specifications
Characteristic
Value
The device is powered by an alternating current network with a voltage of:
20 (+ 22-33) V and frequency (50 ± 1) Hz
The back-up power supply of the device is provided by sealed maintenance-free lead-acid batteries (AB) with nominal voltage
12 V
For 24-volt devices:
two AB
For 12-volt devices:
one AB
The maximum capacity of the device placed in the case:
AB 12 Ag
The maximum power consumption of the device from the alternating current network:
no more than 35 W
Voltage in AL:
from 20 V to 30 V
Output voltage for 24 V power supply:
from 20 V to 30 V
Output voltage for 12 V power supply:
from 9,5 V to 15 V
Current in AL:
not more than 30 mA
The total resistance of the signal lines (wires) of the AL without taking into account the resistance of the terminating resistor:
no more than 470 ohms
Leakage resistance between the lines of SHS, as well as between each line of AL and the device body:
not less than 50 kΩ
The switching current of the key of each input-output channel:
no more than 50 mA
Switching current of keys with full load control:
not more than 200 mA
Fixed device settings:
the sound signal is repeated when a new event occurs
Fire alarm power cut-off time when resetting the fire AL:
4 - 6 sec
The delay time for the processing of the fire AL after turning on the power (including during reset) of fire detectors:
4 - 6 sec
Time until automatic reset of the primary fire alarm state (Attention):
5 - 6 min
Time of technical readiness of the device after turning on the power source:
not more than 30 sec
Average working time before device failure:
not less than 40,000 hours
The average service life of the device:
not less than 10 years
Dimensions:
(УКР) 410 х 350 х 140 мм
Weight of the device without battery:
no more than 10 kg
Display
4 rows of 20 characters each
Useful materials
| Name | Country | Comment | Open | Download |
|---|---|---|---|---|
| Manual | ukrainian | |||
| Сertificate | UA(Ukraine) | Valid from January 14, 2022 to January 13, 2025 | ||
| Сertificate | MD(Moldova) | The validity period is unlimited. | ||
| Archive | Manuals |
