Art-Sp2
Product description 
- Description of the capabilities of the new microcontroller intelligent Art-SP2 fire point smoke detector
- 2-wire connection to the control panel
- High resistance to false starts
- Availability of sensitivity drift compensation
- Optical indication of duty mode and "Fire" mode
- Self-diagnosis and optical malfunction indication
- The possibility of connecting a remote indicator (RI)
- Fixed current in "Fire" mode
- Disabling the indication of the duty mode in the dark (at low light levels)
- Features-advantages:
- ART-SP2's chemically milled grid will not rust over time.
- The presence of two LEDs allows you to observe the indication of the detector from anywhere in the room.
- The new two-story smoke chamber allows to significantly increase the stability of ART-SP2's sensitivity to the uniform accumulation of dust in the chamber.
- The average deviation of sensitivity depending on the air flow speed is 1.04, and the average deviation of sensitivity depending on the orientation of the detector to the air flow is 1.03. This means that the sensitivity deviation depending on the speed and direction of the air flow in ART-SP2 does not exceed the measurement errors.
- Reaching the drift compensation limit (multiplicity) –2.5. In fact, this means that the need for maintenance (cleaning the camera from dust) will arise in the ART-SP2 after 10 years. The ART-SP2 detector maintains constant smoke sensitivity even when the dust level is three times higher than the trigger threshold.
- Ease of installation is provided by the innovative detector base. The connection scheme in ART-SP2 allows you to connect each wire to a separate contact. The hole in the base, mm – 40x50mm, which improves the ease of installation.
- The production technology provides calibration of sensitivity in smoke, which ensures stability of sensitivity from product to product with minimal spread, including eliminating the spread of photodiode and LED parameters.
Specifications
Characteristic
Value
Supply voltage:
>12-30 V
Current consumption in standby mode:
no more than 100 μA
Current in FIRE mode:
20 mA
The method of connecting to the PPKP:
two-wire AL
The presence of an indication of the duty mode:
Yes
Power off time to return to normal operation mode:
3 sec.
The method of forming the output signal:
contactless
Overall dimensions:
no more than 100x51 mm
Mass:
no more than 0.15 kg
Useful materials
| Name | Country | Comment | Open | Download |
|---|---|---|---|---|
| Manual | ukrainian | |||
| Сertificate | UA(Ukraine) | valid from November 22, 2023 to November 21, 202 |
Devices with which it is used
