SP-2.1
Product description 
The fire smoke detector is designed to detect fires accompanied by the appearance of smoke in closed rooms with separated spaces (for example, the detector provides simultaneous control inside the room and behind suspended ceilings) and transmitting the “Fire” alarm signal to the fire alarm control panel.
- Unique feature: you use a single device instead of two to control separate spaces
- Easy installation: significant reduction of installation and maintenance time, ease of maintenance
- Yellow and red indicators reflect the 7 operating modes of both sensors:
- Standby mode
- "Fire" mode of the upper sensor
- "Fire" mode of the lower sensor
- "Fire" mode of the upper and lower sensors
- "Failure" mode of the upper sensor
- "Fault" mode of the lower sensor
- "Failure" mode of the upper and lower sensors
- 2-wire connection of upper and lower sensors to one fire alarm loop
- Optical indication using red and yellow indicators
- Automatic dust compensation
- Self-diagnosis of malfunction
- The length of the connecting rod of the sensors - 20, 40, 60 cm
Specifications
Characteristic
Value
Supply voltage:
10 - 30 V
Current consumption in standby mode:
less than 0.22 mA
The method of connecting to the PPK:
two-wire fire alarm Loop
Overall dimensions:
- sensor 1:
no more than 100x48 mm
- sensor 2:
no more than 52x37 mm
- barbell:
by order
- mass:
no more than 0.3 kg
Useful materials
| Name | Country | Comment | Open | Download |
|---|---|---|---|---|
| Manual | english | |||
| Сertificate | UA(Ukraine) | Valid from January 14, 2022 to January 13, 2025 | ||
| Сertificate | RU(russia) | Valid from 04/06/21 to 04/05/26 |
Devices with which it is used
Educational materials
Section 6.10. Smoke fire detectors. Part 10 (SP-2.1 and SP-2.2).
Section 6.10 of the information materials "Components of fire protection systems" discusses two-point smoke fire detectors produced by PE "ARTON": SP-2.1 and SP-2.2 and their analogues produced for other regional markets. The patent numbers of Ukraine for intellectual property objects, which were implemented in these products, are given. The technical parameters of the products are presented. The bases of these detectors and connection schemes are shown, which ensure the formation of the necessary signals for transmission to the control panel. Criticism of a poor-quality technical solution for the protection of the overhead space from another Ukrainian manufacturer of FACP is also presented.
Click to view komponenty_spz_610.pdf
