CCaDD-cabinet control and delay device
Product description 
СС&DD “Vektor” – cabinet control and delay device, designed for early detection of fires and activation of the built-in or external gas fire extinguishing system in communication racks, floor (wall) cabinets and similar equipment, which has a closed volume. The device is a stand-alone gas fire extinguishing system, mounted inside a 19″ case with a height of 2U. It is used with gas, powder and aerosol extinguishing modules.
- Advantages of the device:
- Advantages of the device:
- The device works with any types of automatic and manual detectors, manual start sensors, start blocking sensors;
- Provides the possibility of programming the fire protection key;
- Free binding of outputs (keys) by logical formulas to states (events) in the control system and keys, incl. and without the use of additional devices and software;
- Multiple modes of operation of each input-output channel;
- Low power consumption;
- Built-in fire extinguishing control panel;
- The built-in fire extinguishing system is designed for elimination of fires of classes A, B and electrical equipment under voltage;
- Within the dimensions of the case, two standard detectors can be installed;
- Inside the case there is a compartment for installing a gas extinguishing module with dimensions of 480x145x80mm;
- The device is designed for 24/7 operation.
Specifications
Characteristic
Value
Internal power supply voltage:
24 V or 12 V
Number of input-output channels:
8
Number of fire protection keys:
1
Number of freely programmable keys:
8
Current in AL:
no more than 30 mA
The switching current of the key of each input-output channel:
up to 50 mA
Switching current of keys with full load control for connecting detectors:
up to 200 mA
Switching current of keys intended for controlling fire extinguishing means:
up to 4 A
Fire alarm power cut-off time when resetting the fire AL:
4-6 sec
The delay time for the processing of the fire alarm system after turning on the power (including during reset) of fire detectors:
4-6 sec
Time until automatic reset of the primary fire alarm state (Attention):
5-6 min
Useful materials
| Name | Country | Comment | Open | Download |
|---|---|---|---|---|
| Manual | ukrainian | |||
| Сertificate | UA(Ukraine) | Valid from January 14, 2022 to January 13, 2025. | ||
| Video | video on YouTube |
|
Devices with which it is used
